BWZPN - EUTECROD 185 FC
- MSDS: BWZPN
- Manufacturer: EUTECTIC CORP
- Product Name: EUTECROD 185 FC
- National Stock Number: 3439-00-088-4818
Product Identification
Product ID:EUTECROD 185 FC
MSDS Date:03/15/1993
FSC:3439
NIIN:00-088-4818
MSDS Number: BWZPN
Responsible Party
FLUSHING, NY 11358-9981
US
Emergency Phone: 718-358-4000
Info Phone: 718-445-1784
Cage: 72271
Contractor
Telephone: 704-527-9800/ 800-221-1433
Cage: 72271
Ingredients
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 40-50%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC (SARA III)
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 30-40%
OSHA PEL 10 MG ZNO/M3
ACGIH TLV: 10 MG ZNO/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
BORIC ACID
CAS: 10043-35-3
RTECS: ED4550000
OSHA PEL 10 MG BORATES/M3
ACGIH TLV: 5 MG BORATES/M3
SODIUM TETRABORATE, DECAHYDRATE
CAS: 1303-96-4
RTECS: VZ2275000
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3; 9192
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION-THE FUMES WITH THE HEATING,
WELDING, BRAZING, SOLDERING OR CUTTING METALS CAN BE DANGEROUS TO
YOUR HEALTH AND IVEREXPOSURE CAN CAUSE LUNG DAMAGE AND/OR PTHER
ORGAN DAMAGE. EYE/SKIN-ARC RAYS AND UNTRAVIOLET LIGHT CAN INJURE
THE EYES AND BURN SKIN. INGESTION-DANGER! MAY BE HARMFUL OR FATAL
IF SWALLOWED.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:LIQUIDS USED IN FLUXES AND CHEMICAL AIDS MAY
CAUSE IRRITATION OR POSSIBLE CHEMICAL BURNS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION-MOVE VICTIM TO FRESH AIR SOURCE. CONTACT A
PHYSICIAN & ADVISE ON INGREDIENTS. SKIN-THOROUGHLY WASH HANDS OR
EFFECTED AREA WITH SOAP & WATER TO REMOVE ALL RESIDUE. IF RASH
DEVELOPS, CONSULT A PHYSICIAN. EYE-THOROUGHLY FLUSH WITH WATER FOR
AT LEAST 15 MIN TO REMOVE ALL RESIDUE. OBTAIN PROMPT MEDICAL ADVISE
FOR FLUX & CHEMICAL AIDS. INGESTION-CALL A PHYSICIAN &/OR LOCAL
POISON CONTROL.
Fire Fighting
Flash Point:NONE
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:TOXIC FUMES MAY BE PRODUCED - USE AN APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:SOME FLUXES AND CHEMICALS AIDS MAY GIVE
OFF HYDROGEN CHLORIDE, PHOSGENE AND CHLORINE GASES. CANS, UNDER
PRESSURE, AND FLAMMABLES MAY EXPLODE.
Accidental Release
Spill Release Procedures:USE APPROPIATE MEASURES TO KEEP MATERIAL
AIRBORNE DUST LEVELS CONTAINED WITH EXPOSURE LEVELS OF THE
INGREDIENTS SECTION.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NO FOOD OR SMOKING IN WORK AREAS. WASH THOROUGHLY
AFTER HANDLING. AVOID BREATHING FUMES AND VAPORS. DO NOT GET IN
EYES, ON SKIN OR ON CLOTHING.
Exposure Controls
Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
TO EXHAUST ALL FUMES, VAPORS AND DUST BELOW THE RECOMMENDED
EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GENERAL VENTILATION AND LOCAL EXHAUST AT THE
WORK SITE TO KEEP ALL FUMES & DUST FROM THE BREATHING ZONE.
Protective Gloves:WELDER'S GLOVE
Eye Protection:PROTECTIVE FACE SHIELD
Other Protective Equipment:EYE WASH STATION, APRONS, HATS, ARM &
SHOULDER PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:WEAR HEAD AND BODY PROTECTION WHICH HELP TO
PREVENT INJURY FROM RADIATION, SPARKS AND ELECTRICAL SHOCK.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Solubility in Water:INSOLUBLE
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METAL OXIDES. DECOMPOSITION PRODUCTS
INCLUDE THOSE ORIGINIATING FROM INGREDIENTS + THOSE FROM THE BASE
METAL & COATING.
Disposal
Waste Disposal Methods:DISPOSEOF WASTE MATERIAL, POWDER, GRINDING OR
FILTER RESIDUE IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.